ZINOXX

Zinoxx provides active cathodic corrosion protection for steel, applied as an aerosol or by dipping. The material is characterized by its extreme anticorrosive protection,

a good reaction to agitation (sedimentation) and an excellent leveling (sinking).

STORAGE:

Closed containers should be stored at a temperature of 5 ° C to 25 ° C (protected from

direct sunlight).

Opened containers must be processed quickly. The expiration date for each batch is listed on the product label.

INDUSTRIAL APPLICATION:

The substrate must be clean, oil-free and dry. For preliminary cleaning the cleaners

Alkaline or solvent mixtures are suitable.

Spray Zinoxx on the surface and dry at room temperature or by thermal curing in a convection oven.

During application it is recommended to shake the liquid coating material lightly and continuously to

avoid settling of pigments.

Spray nozzles with a diameter of 1.2 to 1.5 mm are recommended

and compressed air without oil of 1 – 1.5 bar (atm).

For immersion, dilution of the coating solution with butoxyethanol (1: 1 by weight) is recommended. The

laminate or the part is immersed in the coating solution until homogeneous wetting is obtained. Retires

the piece from the coating solution and the excess solution is removed.

Note: the coating liquid is sensitive to water and humidity. Re-close containers carefully

and do not keep them open unnecessarily for long periods.

DRYING:

1. a) Drying at room temperatureThe coating should be dry to the touch after 15 min at room temperature. After 1 to 3 days, inDepending on the environmental conditions (temperature, humidity), the coating will be completely dry. The spesorRecommended dry coating is 10 to 30 μm.

   b) Curing in a convection oven (forced drying)

   The coating is dried for 15 to 30 minutes at a temperature of 150 ° C to 250 ° C in a convection oven.

   The recommended dry coating thickness is 5-10 μm.